#sqlab
Tag us on your picture with #sqlab and become part of our homepage.
In terms of ergonomics, in contrast to our MTB handlebars a 10° frontsweep is used which decreases towards the end of the handlebar. All contact surfaces are optimized in every detail.
Frontsweep
Angular and Areal
Thanks to the flattened outer surface, the handlebar is also pleasant to grasp in the lower grip and at the same time provides a secure hold in various riding positions.
Ergobar
The Ergobar is a wave-shaped elevation on the underside. This results in a flat, slightly angular underside of the handlebar. Fits perfectly to the angled, bent fingers.
Maximum Surface
The area which is flattened at the top and extended far forward is maximally large. This allows the fingers to safely enclose the handlebar and at the same time provides grip.
Grip Security
The combination of contact surface and freedom of movement ensure the best possible pressure distribution.
Pressure Measurement
The pressure measurement shows that the maximised contact surface of the 312R handlebars enables an even distribution of pressure on the hands.
The pressure distribution is shown in colour: white means low pressure, from blue/green/yellow/orange to red the pressure increases.
| 38 | 40 | 42 | 44 | |
| Handlebar width C-C (mm) | 380 | 400 | 420 | 440 |
| Reach (mm) | 80 | 80 | 80 | 80 |
| Drop (mm) | 120 | 120 | 120 | 120 |
| Flare (°) | 1,5 | 1,5 | 1,5 | 1,5 |
Handlebar width
The individual handlebar width is decisive for an ergonomic position on the road bike and depends on the shoulder width.
Shoulder width = Handlebar width
Shoulder width = distance from the left to the right acromion of the shoulder.
- ARTICLE NUMBER(S)
- 2381 / 2382 / 2383 / 2480
- AREA OF USE/BICYCLE TYPE
- Road
- WEIGHT(S) IN G
- ca. 235 / 240 / 245 / 250
- MATERIAL
- T1K Carbon
- WIDTH(S) IN MM (C-C)
- 380 / 400 / 420 / 440
- RISE IN MM
- 0
- DROP IN MM
- 120
- REACH IN MM
- 80
- FRONTSWEEP IN °
- 10 zu 2
- FLARE IN °
- 1,5
- DOWNSWEEP IN °
- 0
- CLAMP DIAMETER IN MM
- 31,8
- STEM CLAMPING WIDTH IN MM
- min. 40 - max. 58
- MAXIMUM TORQUE IN NM
- 8
- MAXIMUM SYSTEM WEIGHT ALLOWED IN KG
- 120
- E-BIKE READY
- Yes
- DIN/ASTM CATEGORIES
- 2/6
Ergonomic, lightweight and the first Road bike handlebar from SQlab. In terms of material processing, weight and durability, we have already been able to prove that we are amongst the world‘s best in the field of MTB handlebars. In contrast to our MTB handlebars a 10° frontsweep is used which decreases towards the end of the handlebar. All contact surfaces are optimized in every detail, such as the Ergobar at the bottom or the small cutout on the outside for the little fingers.
• Ergobar: The Ergobar is an wave-shaped elevation on the underside. This results in a flat, slightly angular underside of the handlebar. Fits perfectly to the angled, bent fingers.
• Maximum Surface: The area which is flattened at the top and extended far forward is maximally large. This allows the fingersto safely enclose the handlebar and at the same time provides grip.
• Grip Security: The combination of contact surface and freedom of movement ensure the best possible pressure distribution.
• Angular and Areal: Thanks to the flattened outer surface, the handlebar is also pleasant to grasp in the lower grip and at the same time provides a secure hold in various riding positions.
• Di2 ready
Have you seen?
Customers who viewed this product also viewed the following products.
.contact "Call / Message")