#sqlab
Tag us on your picture with #sqlab and become part of our homepage.
Perfect fit
The correct width saddle is a prerequisite for maximum performance.
Available widths: 12 / 13 / 14 / 15 cm
Sleek rear
The raised back section provides more rearward support and ensures efficient power transmission.
Lower saddle nose
The level and lowered saddle nose applies less pressure to the sensitive areas of men and women alike.
Center Dip
The slight dip in the center of the saddle reduces pressure to the sensitive tissue areas of the perineum.
Low and flat
The flat saddle nose has a slight curvature which provides maximum contact area providing and associated reduced pressure.
Saving Energy
The wave shaped ERGOWAVE® profile which contours from the rear to the front offers a perfect form-fit shape for most sitbones. The rider does not need to be seated in an inefficient and tiring sitting position and all energy can be used for forward propulsion.
- ARTICLE NUMBER(S)
- 1882 / 1883 / 1884 / 1885
- AREA OF USE/BICYCLE TYPE
- MTB Tech & Trail
- WEIGHT(S) IN G
- approx. 200 / 201 / 205 / 205
- ACTIVE TECHNOLOGY
- No
- MOUNTING HEIGHT IN MM
- approx. 51
- SIZE(S) IN CM (EFFECTIVE SADDLE WIDTH)
- 12 / 13 / 14 / 15
- LENGTH IN MM
- approx. 280
- MATERIAL RAILS
- S-Tube (light metal alloy - hollow)
- MATERIAL BASE
- Carbon Fibre reinforced Polyamide Compound (PA12 + CF)
- MATERIAL PADDING
- Superlight Foam
- MATERIAL COVER
- Microfibre
- HARDNESS IN SQ-SHORE
- 55
- RELIEF OF PERINEAL AREA IN %
- 65
- MAXIMUM TORQUE IN NM
- 18
- E-BIKE READY
- No
- DIN/ASTM CATEGORIES
- 4
- GENDER
- Unisex
The 611 ERGOWAVE® was precisely designed to accomodate the requirements of off-road cycling and perfectly meet the demands of All Mountain and Enduro use. The wave-like shape and raised rear section provides perfect rearward support and an optimal pressure distribution which reaches deep into the body structures resulting in improved power transmission. The lowered nose in combination with the dip provides optimal pressure relief for the perineal area. For an even better pressure relief, especially on long technical climbs, the saddle nose of the 611 was made approx. 4 mm wider than that of the 612, but just as flat and with largest possible surface area. The padding was designed for the specific needs on the MTB with better dampening properties than the 612 making it perfect for rough off-road terrain. Additionally, a premium quality Kevlar material protects the saddle in the exposed places. Due to its flex properties, the saddle is most comfortable up to 75 kg. The maximum load should not exceed 90 kg.
Have you seen?
Customers who viewed this product also viewed the following products.
.contact "Call / Message")